Three rollers wet grinding machine is medium press machine for wet grinding equipment, this machine is used for high alumina sand or clay and other materials mixing to achieve the water balance and all kinds of ingredients well proportioned.
1.This machine power is through the triangle belt transmission reducer, again by the small bevel gear reducer drive and pan even as one of the big gear, so that the running wheel counterclockwise direction.
2.Disc material with pan when running, by inside and outside the scraper strike, so as to achieve the goal of mixing.
3.At the same time make the floating support on raw materials and the beam of grinding stone grinding wheel friction wheel of raw materials mixing, rolling, crushing, rolling to water balance, even after repeated ratio, low gas content, increase the rate of forming and molding quality.
1. Through this machine treatment can improve the forming rate of material.
2. This machine is an ideal equipment for the whole , which is easy to operate and convenient to use.
3. The products are enclosed two kinds of structure and open type structure, can spare sealing cover to prevent air pollution.
4.Through the machine grinding material molding products, with high density, good strength, no porosity ratio, etc.
Specification |
Input size(mm) |
Rotate Speed (r/min) |
Powder(kw) |
Weight(t) |
|
1600A |
1600×400×200×500±20mm |
30mm |
20-22 |
25KW |
14.5 |
1500A |
1500×350×200×460±20mm |
20-22 |
22KW |
13.5 |
|
1500B |
1500×350×150×460±20mm |
20-22 |
22KW |
12.3 |
|
1500C |
1500×300×150×420±20mm |
20-22 |
22KW |
11.3 |
|
1400A |
1400×250×150×350±20mm |
16-18 |
18.5kw |
8.5 |
|
1400B |
1400×250×150×350±20mm |
21-23 |
18.5kw |
8.5 |
|
1350A |
1350×250×150×350±20mm |
16-18 |
18.5kw |
8 |
|
1350B |
1350×250×150×350±20mm |
21-23 |
18.5kw |
8 |
|
1300A |
1300×250×150×350±20mm |
16-18 |
15kw |
7.5 |
|
1300B |
1300×250×150×350±20mm |
21-23 |
15kw |
7.5 |
|
1200A |
1200×200×80×250±20mm |
17-19 |
7.5kw |
5.5 |
|
1200B |
1200×200×80×250±20mm |
23-25 |
7.5kw |
5.5 |
|
1100A |
1100×200×80×250±20mm |
17-19 |
7.5kw |
5 |
|
1100B |
1100×200×80×250±20mm |
23-25 |
7.5kw |
5 |
|
1000 |
1000×200×80×250±20mm |
13-15 |
5.5kw |
4.5 |
|
900 |
900X200X80 |
10-15 |
5.5kw |
3 |
Tel:0086-371-85613608
Tel:0086-371-64117888
Mobile:0086-18538292735
Fax:0086-371-64346708
Email:briquettemachine@outlook.com
Skype:briquettemachine@outlook.com