Home Page |
Contact Us
×
  • 0086-371-85613608
  • 0086-371-60328805
Contact Us

The roller skin wear resistance of ...

Home > NEWS > Views

The roller skin wear resistance of briquette making machine depends on the selection of material and technology

The roller skin wear resistance of briquette making machine depends on the selection of material and technology

In the application of mineral powder briquette making machine cost, in addition to the remaining power consumption is the proportion of replacement parts is relatively large, and energy saving, increase revenue today, the user to buy the ball of mineral powder pressure ball double replacement frequency The smaller, the higher the income, on the contrary less. So how can reduce the replacement frequency? This is necessary to manufacturers of briquette making machine equipment, the wear of the roller situation.
Fuyu mechanical technology and selection process to ensure that the ball rolling mill equipment pressure roller wear
     In general, the more wear-resistant roller use of the longer the frequency of the replacement of the end of the user's production costs are less, the more benefits. However, in industrial production, a variety of powder materials are required to join the binder, because the material powder contains a variety of chemicals, together with some of the binder contained in the chemical substances, Pressure roller weak or strong corrosive, and its acid-base corrosion of the roller particularly harmful, but also very common.

     Such as in certain processes must be added salt (that is, sodium chloride), and its corrosion of the material roller, resulting in many other materials briquette making machine roller in two months scrapped, while the East Heavy machinery, Ball machine equipment to suppress the material properties required for the ball rolling machine equipment equipped with the roller, the use of alloy roll, the material has good corrosion resistance, even the highly corrosive materials, but also can deal with, still Do not move, are in 8-12 months, local users deeply feel his good, practice has fully proved its wear-resistant advantages.
Fuyu mechanical technology and selection process to ensure that the ball rolling mill equipment pressure roller wear
      Fuyu mechanical balance of technology and material selection to ensure that the ball mill equipment ball mill wear resistance, I plant powder ball machine ball mill equipment, not only wear-resistant materials, but also with a special process, the use of precision casting , It is made in the rough, with the ball and socket together cast, because their hardness is particularly high, the processing tool is the car does not move, only the grinding machine grinding. Its wear layer thickness of 25-35 mm, while other materials in the heat treatment, the hardness layer is only 1-1.5 mm thick, a difference of nearly 30 times. So that is the same in many of the equipment, Fuyu mechanical ore powder briquette making machine equipment, one of the reasons different from other devices.

 

 

 

 

 

 

 

 

 


Last article:【The application of pre - pressing spiral device in dry powder ball press machine
Next article:【The feeding requirements of briquette ball press machine
News:
Contact Us:

    Tel:0086-371-85613608

    Tel:0086-371-64117888

    Mobile:0086-18538292735

    Fax:0086-371-64346708

    Email:briquettemachine@outlook.com

    Skype:briquettemachine@outlook.com