The high pressure ball press machine need to idling for a while before feeding, you have to make the hydraulic pressure achieved a certain extent, then it can be feed. Feeding too early or too late will affect the molding rate. Compared with ordinary ball press machine, high-pressure ball press machine is different with the screw pressure part. This device make the the material be mandatory pressed into the high pressure machine by spiral pressure, when the raw material into the feed port.It makes the material to be initially squeezed, and made adequate preparation for the follow-up of the secondary pressure and molding material. Cause the material is squeezed more easily the more the number of molding.
However, if the material is too dry, then the ball press machine out of the pellet is very friable,not strong, fragile. If the material is too wet, it is not easy to briquette, but also sticky mold, clean up, very troublesome. The best in the production, the amount of material, add water, the amount of adhesive are adjusted to a certain percentage. Press the ball machine this formula is very important. Moreover, different materials, and sometimes add the adhesive is not the same. Of course, these adhesives are common, the price is not expensive. Customers can rest assured that in any market will be found.
Our company specializes in producing pressure ball machine, with modern standards of the plant, first-class advanced technology and testing equipment, with the Coal Research Institute and the extensive cooperation of scientific research departments so that products continue to improve and better.
